Custom Cycle Parts with Attitude, Made in the US of A!

This 621 Cycles website isn't built to be cute or win any awards in web design. It's built to help you find our custom Fiberglass and CNC manufactured parts as easily as possible. We use Amazon to handle our orders, so they handle all of the high-tech web security for your order to be placed, filled, and shipped quickly. You can email us at sales@621cycles.com to discuss your needs, and be sure to check out daily build pictures and loads of customer installations on our facebook page at: facebook.com/621cycles

ChoptPac Low Profile Motorcycle Trunk - These custom motorcycle trunks are built from scratch, one at a time, by hand, in our North Carolina shop, by us. They're not a renamed imported plastic box, or a photocopy of someone else's work. These are thicker than a Yaffe Razor, thinner than a HD ChoptPac, have our custom hardware, extended rain drip, OSB reinforced bottom, and can be built in a number of configurations with several different options. Click the pic on the right to go to the ChoptPac page.

PhatRisers, sometimes called PhatRisers-1 or simply Phat-1s - These were the very first version introduced back in 1998 in small quantities. In most applications, these raise your handlebar grips up about 1-1/2" from the original position, and provide about 2" of additional pull back from your original position. They are the most popular version in production. They're about the best 'bang for your buck' in terms of ease of installation and reduction of arm/neck/back strain. They typically work with your original hoses and cables and require little to no relocation of anything. In the 'old school' way of thinking, these are what some would consider a 4 x 1.

These are available in Polished (seen on the left), matte black, and polished with a flamed engraving. These come with all of the mounting hardware and instructions for installation. These are manufactured for most Honda, Kawasaki, Yamaha, and Suzuki cruisers. Click the pic on the left to go to the PhatRiser-1 page.

PhatRisers-II, also known as Phat-IIs - This is the second generation, introduced back around 2001. In most applications, these raise your handlebar grips up about 2" from the original position, and provide about 3" of additional pull back from your original position. They are very popular with shorter risers and on long bikes that have a big reach requirement, like the Kawasaki Nomads and such. They typically work with your original hoses and cables, but may require a bit of relocation. No worries, we send instructions for this, too. Again, in the 'old school' way of thinking, these are what some would consider a 5.5 x 1.25 .

These are available in Polished (seen on the left), matte black, and polished with a flamed engraving. These come with all of the mounting hardware and instructions for installation. These are manufactured for most Honda, Kawasaki, Yamaha, and Suzuki cruisers. Click the pic on the left to go to the PhatRiser-2 page.

PhatRisers-III - Phat is where it's at! These were originally designed for the Honda Spirit 750, but folks kept asking for them for other models. On the 750 they work with stock hose/cables, but on most others they require a change. Check the PhatRiser-III page for the specifics. Again, in the 'old school' way of thinking, these are what some would consider a 8 x 1 .

These are available in Polished (seen on the left), matte black, and polished with a flamed engraving. These come with all of the mounting hardware and instructions for installation. These are manufactured for most Honda, Kawasaki, Yamaha, and Suzuki cruisers. Click the pic on the left to go to the PhatRiser-3 page.

ExtendRisers - What a great and inexpensive way to obtain additional rise and pullback from your factory T-Bars (a handlebar style where the riser stems and handlebar are welded together as one)! The existing angle of your top triple tree is utilized to provide a more comfortable riding position without the need to change your bars, controls, etc. These are easy bolt-on accessories for your motorcycle.

These are available in Polished (seen on the right) and matte black, depending on the model. These come with all of the mounting hardware and instructions for installation. These are manufactured for most Honda, Kawasaki, and Suzuki cruisers equipped with factory T-Bars. Click the pic on the right to go to the ExtendRisers page.

StakRisers - Our cost saving alternative to conventional risers! StakRisers were designed to work with your original factory risers to allow for greater comfort from an improved handlebar grip position.

These are available in Polished (seen on the right) and matte black by special request. These come with all of the mounting hardware and instructions for installation. These are manufactured for most Kawasaki and Triumph cruisers equipped with conventional factory risers. Click the pic on the right to go to the StakRisers page.

PhatBones - This is the product line that was developed to provide risers for T-Bars with 1-1/2" riser stems like those found on bars from Carlini, Punisher, etc. These are CNC machined from 6061-T6 billet and come in additional rise heights of 1", 2", 3", and 4". Bad Bones for Bad Bars! Click the pic on the right to go to the PhatBones page.

PhatStix - This line of Beefy Bad Boys are just what the doctor ordered for the new Fatty Bars that are so popular. This line of convertable risers are available for bars up to 1-1/2" in diameter, and up to 7" tall. Click the pic on the right to go to the PhatStix page and check'm out!.

PhatGrips - Part of the Phat Products line, these CNC machined, engraved, and chromed hand grips are real show-stoppers. Manufactured here in the USA, these aren't like your typical imported cast aluminum junk that seems to dominate this market. Easy to install and built to last, these are hand grips with attitude. These are available in 4 different styles ('Shooter' style seen on the left), and come with all of the mounting hardware and instructions for installation. Universal fitment eliminates model selection worries. Click the pic on the left to go to the PhatGrips page.

PhatPegs - Another parts from the Phat Products line, these CNC machined, engraved, and chromed foot pegs are the real deal. These are designed to take a beating, and keep looking good. HEAVILY chrome plated to handle years of use and punishment. These are available in 4 different styles ('Spade' style seen on the left), and come with stainless steel hardware and grade 8 footpeg mounting bolts. Universal fitment with any Kuryakyn standard footpeg mounts eliminates model selection and fitment issues. Click the pic on the left to go to the PhatPegs page.

HardTail Kits - We have been producing Hard Tail Suspension Kits since 1998, and they are very popular for that 'Seriously Slammed' look. Click the pic on the right to go to the HardTail page and check'm out!.

Rear Suspension Lowering Kits & Tools - Like our HardTail kits, we've also been producing suspension lowering kits since 1998. These are kits that work with your existing shocks to lower the bike while retaining the functionality of your suspsnion. We manufacture these for bikes like:

  • Kawasaki EN 500, VN800, VN900
  • Honda Ace 750, Spirit 750, Phantom 750, Shadow RS, Aero 750, Spirit 1100
  • Yamaha V-Star 950, V-Star 1100, V-Star 1300, Stryker 1300, Royal Star
  • Kawasaki EN 500, VN800, VN900
  • Suzuki Volusia 800, C50, M50, Intruder 1500, C90, C(0 Boss
  • Triumph Legend, Thunderbird
    Click the pic on the right to go to the Rear Lowering Kit page and check'm out!.

  • Lighting Products - We produce many types of lighting products...Under Fender light kits, lay down license kits, hollow aftermarket lighting adapters, lighting control units, etc. This section will be growing as we add our products online. Click the pic on the right to go to the Lighting Products page